Setting Up Your Work Site

Selecting a Work Site

• The single most important consideration is the availability of fresh air. The best location is outdoors, preferably in a shaded area, a carport, or under some type of cover to shield the work from the sun. The sun will speed up the evaporation of the remover. A garage with windows and doors on two sides to create adequate cross ventilation also can be used. Avoid working indoors if at all possible.

• If you must work indoors, open all windows and, if possible, all doors to achieve a strong flow of fresh air through the work area. It is advisable to use forced ventilation (fan) to improve the flow of fresh air. Because some removers are flammable, however, be sure to read the instructions on the label before using a fan as the friction between metal parts may spark and ignite the vapors. The label is the key. It will advise you on proper ventilation.

• Do not allow children to play in the work area to avoid exposure to paint-removing chemicals.

Set Up

When setting up your work area, it is a good idea to elevate the work by using saw horses or some equally sturdy support. This accomplishes two things:

• first, by having the work slightly above waist level, you will reduce the chance of getting a backache that often comes from prolonged bending;

• second, for best results, the work should not touch the floor.

What You'll Need, The Procedure

[ WHAT IS PAINT REMOVER? ] [ WHAT YOU'LL NEED ] [ SETTING UP YOUR WORK SITE ] [ THE PROCEDURE ] [ CLEANUP AND DISPOSAL ] [ SAFETY TIPS ]

Back to Main